Mitsubishi Outlander Sport 2019 Owner's Handbook Manual page 13

INSTRUMENT PANEL
12
ECO DRIVE ASSIST
This function displays how fuel-efficiently you are driving
under different driving conditions. To show, press the Multi-
information Display switch. The ECO drive assist is displayed
only when the vehicle is driven with the selector lever in the "D"
(DRIVE) position or when the vehicle is driven in the sport mode
(for vehicles equipped with sportronic steering wheel
paddle shifter).
SEAT HEATER SWITCH (IF EQUIPPED)
POSITION
HI
NEUTRAL
LO
ACTION
For quick heating
Heater off
Keeps seat warm
START/STOP ENGINE SWITCH (IF EQUIPPED WITH F.A.S.T.-KEY)
While carrying the F.A.S.T.-KEY within the
operating range, the Start/Stop Engine
Switch can be used to start the engine.
• Move the selector lever in "P" position
and hold the brake pedal down. Push
the Start/Stop Engine Switch.
• To stop the engine, stop the vehicle
completely and move the selector
lever to "P" then press the Start/Stop
Engine Switch.
*If you have to bring the engine to an emergency stop while
driving, press and hold the Start/Stop Engine Switch for 3
seconds or more, or press it quickly 3 times or more.
• If you press the Start/Stop Engine Switch without depressing
the brake pedal, you can change the operation mode in the
order of OFF, ACC, ON, OFF.
* If the engine cannot be started by depressing the brake
pedal, depress the brake pedal more firmly than usual with
the right foot. Then, press the Start/Stop Engine Switch.
• If the engine cannot be started or the operation mode cannot
be changed, check the position of the F.A.S.T.-KEY or the
battery performance of the F.A.S.T.-KEY.