Sms Setting; Delivery Ack; Group Edit - VACOM WIRELESS, INC VC-7C Operating Manual

If your phone is turned ON when it receives a voice message, your phone sounds an alert or
vibrates and is shown on the display. You have a choice of listening the message
immediately by pressing "SMS" key or listening it later. To listen a new voice message;
- Press "SMS" and choose "4. Voice Mail" and "1. Listen to MSG".
- Then the time you received, a sender and sender 's phone number appear on the display.
- If you want to listen a voice message, dial "*** (carrier 's voice mail service number)".
Then you can listen the voice messages.
- If you want to see messages again, press "SMS", "4. Voice Mail" and select "
Voice". Then you can see the voice mail list on the display. Select a message and press
"SEL ( )".
- If you want delete a message, press "DEL ( )" key while you are reading a voice mail
list.
- If you want to call to a sender back, simply press "SEND" while you are reading or
listening a voice mail.
III.

SMS Setting

1. Delivery ACK

To set Delivery ACK, press "SMS", "3. SMS Setting" and "1. Delivery ACK". And choose
"On" or "Off" and press "OK" to set.
2. Message Alert
You can set message alerts in 4 different types (Only Lamp, Bell, Vibrator).
- Press "SMS", "3. SMS Setting", "2. Message Alert" and "1. Message Alert".
- Select "Only Lamp", "Bell 1/2/3" or "Vibrator".
- Press "OK ( )" to set.

3. Group Edit

You can send SMS to several phone numbers at the same time by using Group function. The
total number of groups can be up to 5. To set the group,
- press "SMS", "3. SMS Setting" and "3. Group Edit".
- Choose "Group 1", "Group 2", "Group 3", "Group 4" or "Group 5" and press "SEL
38
1