Table of Contents
Advertisement
BASIC FUNCTIONS
1. Turning Your Phone On
The first time you turn your phone on after UIM installed, your phone asks you to enter the
"PIN1" password that you receive from the carrier with UIM. After you successfully enter the
password, you can use your phone. If you want to UIM "Enabled" or "Disabled" or if you want
to change PIN password, please refer to "VI. SECURITY FUNCTION" on page
.
If you fail to enter the correct password 3 times, the phone will be blocked. And you are
required to enter PUK password if available.
2. Making a Call.
To place a call :
Press and hold "END/ " to power on your phone. If you see indicators on the display that
means the phone is on.
Enter the phone number (up to 32 digits) by pressing the digit keys. The phone number displays
from left to right.
Press "SEND". The phone places the call to the entered phone number (if service is available).
You can also make calls ;
From your PIM (see "III. Personal Information Management" on page
)
By using One-, Two-, or Three-Touch Dialing (see "Speed Dialing" on page
).
3. Ending a Call.
To end a call, close the flip or press "END/ ". The call time (length of the call) displays, along
with the name and number of the called party (if available). The phone returns to Standby mode
automatically.
4. Answering a Call.
To answer an incoming call, open the folder and press any key. If your phone is registered in
Caller ID, a caller 's phone number is displayed on the display. If a caller 's number is stored in
Phone Book, the caller 's name is displayed.
5. Correcting Dialing Mistakes.
To correct a misdialed digit, press "CLR" to erase one digit at a time. You can erase all the
digits at once by pressing "CLR" and holding it down for at least one second.
6. Storing Phone Numbers
14
Advertisement
Table of Contents
