Security Function; Phone Lock; Changing Password - VACOM WIRELESS, INC VC-7C Operating Manual

VI.

SECURITY FUNCTION

Your phone provides many security options, including a user -programmable lock code and call
restriction features. To access the Security menu in Standby mode, press "Menu ( )" and "6.
Security". And enter the four-digit password.
Note : The password is "0000" if you don't have your phone number yet. Or the last 4 digits of
your number if you already have you phone number. If you want to change the password, see
below;

1. Phone Lock

Locking the phone limits all outgoing calls except calls to the three hard-coded emergency
numbers (119 / 110 / 112).
You can lock the phone manually during use, or set the phone to lock automatically when it is
turned on. When the phone is in Lock mode, you can answer incoming calls, but you mus t
unlock the phone to place outgoing calls (except to emergency).
- Press "Menu ( )", " " to fine "6. Security" and choose "1. Lock Mode".
- Enter the password.
- Choose "never", "on power up" or "now" and press "OK ( )" to set.
Notes 1) "never" – the phone is unlocked.
"on power up" – the phone is locked automatically when it is turned on.
"now" – you must unlock the phone to place outgoing calls.
Note 2) Or you can simply lock your phone by pressing and holding "#" on standby mode. It is
same as "now" option. To release Lock mode, press and hold "#" again.

2. Changing Password

If you want to change the password,
- Press "Menu ( )", " " to fine "6. Security" and choose "2. New Password".
- Enter the password.
- Enter the new password and press "OK ( )".
- Then you can see "RE-ENTER NEWCODE" on top of the display.
32