Page 1
EN User Manual FR Manuel utilisateur DE Bedienungsanleitung ES Manual del usuario IT Manuale d’uso PT Manual do Utilizador NL Gebruiksaanwijzing CZ Návod k použití Register your product and get support at www.philips.com/support...
Page 2
User Manual Register your product and get support at www.philips.com/support...
Table of contents Introduction �������������������������������������������������3 9 Change settings ����������������������������������18 Dear customer ...............3 Language and input settings .........18 About this user manual ..........3 Picture settings ............18 What’s in the box ............3 Sound settings .............19 Customer service centre ..........3 Power control settings ..........19 General safety information ���������������...
Introduction What’s in the box Screeneo S4 projector (SCN450) Remote control with 2 AAA batteries Dear customer AC power cable with plug x 4 Thank you for purchasing this projector. Power adapter We hope you enjoy this product and the many...
Have the product Please find the details of authorised service inspected by an authorised service centre. centres on the warranty card supplied with this Always handle the product with care. Avoid product. Philips · Screeneo S4...
2 Overview Do not remove the type label from this product, as this will void the warranty. Power supply Top/Front view Use only a power adapter which is certified for this product (see Technical data, page 24). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location.
LED lamp. Access the settings menu. Confirm a selection or entry. (Android menu button) • When browsing apps, access more options. • When playing media, access more options. Enable or disable on-screen pointer. Increase or decrease volume. Philips · Screeneo S4...
3 Initial operation Adjust image sharpness. Color buttons Placement Select tasks or options when using application services. You can install the projector in four different configurations. Follow the guidelines below for Mute or restore volume. different projector placement. Notice Access the home screen. For overhead mounting on ceiling, purchase a projector mount Press to access Bluetooth settings...
, and go to Image - Ceiling and 151” 400 cm Rear). Recommended sizes Environment Screen Distance size Daylight living room 64” 177 cm Evening living room 100” 185 cm Home theatre (dark) 160” 293 cm Maximum recommended 190” 350 cm size Philips · Screeneo S4...
Connect power supply Open the battery compartment. Insert the supplied batteries (type AAA) with correct polarity (+/- ) indicated. CAUTION! Close the battery compartment. Always use the button to turn off the • When using the remote control, point projector. This is essential to prevent the remote control at the IR sensor on damage to the LED lamp.
To exit correction mode, press Notice For the best and optimal image quality, the projector should always be in front • Language: Select your desired language for of the projection screen. on-screen menus. Philips · Screeneo S4...
Page 12
• Time Zone: Select your time zone. • Keyboard Input Method: Select English keyboard or Gboard. When the settings are made, press return to Step 1 interface and select Next to proceed to Step 2 interface. Notice If you select Gboard as your input method, you need to activate on-screen pointer feature before you can input text through pop-up virtual Gboard (see...
To browse, search and install applications, access Aptoide TV app store on the home screen. • To uninstall applications on the home screen, select an application, then press on the remote control to access the Uninstall option. Philips · Screeneo S4...
On your Bluetooth device, enable Bluetooth and search for the devices that can be paired (see your device user manual for details). Select “Philips Screeneo S4” on your Bluetooth device to pair with. • When the Bluetooth pairing succeeds, the LED on the projector turns from red to blue.
Bluetooth settings. In the Bluetooth settings interface of the projector, select your Bluetooth speaker name from the Bluetooth device list. The projector is connected to your Bluetooth speaker. Audio from the projector streams to your Bluetooth speaker. Philips · Screeneo S4...
6 Connect to Connect to devices through S/PDIF playback Connect a digital device (e.g. a home cinema devices system or sound bar) to the projector through S/PDIF connection. With this connection, audio is streamed to the connected digital device. Connect to devices through Using an S/PDIF optical cable, connect the S/PDIF connector on the projector to the HDMI...
• To select a slideshow with different To paste files intervals, press Copy a file and navigate to a folder, then press on the remote control to access the Paste options. Philips · Screeneo S4...
8 Wireless On your Mac, access the screen mirroring option located on the top of the computer screen, then select the projector name to projection connect your Mac to the projector. After successful connection, the screen This projector allows you to wirelessly mirror content of your Mac is cast to the projection the following devices to the projection screen.
User: In this mode you can configure your own color balance between red, green and blue. • Aspect Ratio: Select a picture format to fit the projection screen. • Digital Zoom: Adjust image sizes. • Autofocus Settings: Enable or disable autofocus function. Philips · Screeneo S4...
• Keystone Correction: Correct keystone • Speaker: Play audio through the built-in speakers and disable digital or distorted images to be rectangular or audio output. If the PCM or RAW square. option is selected, the built-in • Custom Correction: Adjust image shape speakers are disabled.
Clean the vents In case there is much dust or lints accumulated inside the vents of the projector, you may remove the ventilation grilles on two sides of the projector. Philips · Screeneo S4...
Press , and select Software The latest software of the projector can be Update - Software update - LOCAL found on www.philips.com/support for you UPGRADE. to get the best features and support from the projector. Follow the on-screen instructions to complete the update.
• Format the USB stick in FAT format, then use it. The projector does not react to remote • Check the batteries of the remote control. control commands. • Check if the infrared sensor on the projector is obstructed by some object. Philips · Screeneo S4...
Page 24
Problems Solutions Measures to take if Screen Mirroring does • We recommend checking regularly for new firmware of your projector (see Update software, not work anymore after a firmware update page 20). of an Android or iOS device. • Launch the screen mirroring app on your projector (press on the remote control, select and access the Mirroring option).
Connect the equipment into an outlet on a circuit different from that to which the The Declaration of Compliance can be receiver is connected. consulted on the site www.philips.com. • Consult the dealer or an experienced radio/ Frequency bands Maximum output TV technician for help.
Packaging: The presence of the logo (green other than those designated as original dot) means that a contribution is paid to an Screeneo Innovation SA/PHILIPS products or approved national organisation to improve Screeneo Innovation SA/PHILIPS approved package recovery and recycling infrastructures.
Page 28
Screeneo Innovation SA Route de Lully 5c - 1131 Tolochenaz - Switzerland Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Screeneo Innovation SA is the warrantor in relation to the product with which this booklet was packaged.