Mitsubishi Fresh Master GUF-50RD4 Handbook page 20

9 Unscrew the screws (two screws, indicated by ) to
remove the reinforcement.
0 Unfasten the cord clips (two clips, indicated by ) to
release the motor lead wire.
When the motor lead wire is sealed as shown in the picture below
9 Unscrew the screws (two screws, indicated by ) to
remove the reinforcement and sealing materials.
0 Unfasten the cord clips (two clips, indicated by ) to
release the motor lead wire.
Assembly precaution
After replacing the motor, set the center of packing material of the motor lead wire under the reinforcement.
It is not required to reinstall the metal part shown in the picture below.
Metal part
<Before replacing the motor>
Sealing material
─ 20 ─
Reinforcement
Peel the sealing material.
Reinforcement
<After replacing the motor>
Packing material