Fd 8 series 4-way cassette, ceiling suspended, wall mounted, ducted cassette, ducted - high static including outdoor unit (fdc 6 series and 8 series) (35 pages)
Summary of Contents for Mitsubishi Fresh Master GUF-50RD3
Page 1
No. U-102 FRESH MASTER HAND BOOK (For HONG KONG) FOR DEALERS Model: GUF-50RD GUF-100RD Model name The picture is shown GUF-50RD3. Humidifier function not available. Notice: The term of validity is for a year from the issued date. MITSUBISHI ELECTRIC CORPORATION...
Safety precautions Please be sure to read the following safety precautions thoroughly before commencing with the maintenance work, and conduct the inspection and repair of the product in a safe manner. The types and levels of danger that may arise if the product is handled incorrectly are described by using the warning symbols shown below.
Incorrect handling of the product may result in serious injury Caution or damage to properties including buildings and equipment. ♦ ♦ ♦ ♦ Caution for bodily injury Prevent water leakage •Do not conduct any work at a location •Before removing any of the water-related parts, com- where you do not have a sure footing.
4. Maintenance procedures 4-1 Blower Parts 1Remove the cover fixing special screw. Maintenance cover 2Pull back the hinged clip. 2Open the door and lift off of the hinge brackets. Special screw Hinge 3Remove Filters from the unit. 4Remove Lossnay cores from the unit. Lossnay core Filter 5Remove screw from the core-guide,Remove core-...
Page 8
6Remove separator from the blower portion. 7Remove connections of motor lead wire. Separator 8Remove screws from the motor base. Motor Base Motor 9Remove the pre-assembled blower. Pre-assembled Blower — 8 —...
4-2 Damper Motor Part (All units available) 1Remove (2) screws out from the damper motor cover. Damper Motor Cover 2Take the damper motor out of the cover. Damper Motor 4-3 Circuit Board Part 1Remove the 4 screws from the control cover. Screw Control Cover 2Remove the 3 screws from capacitors.
3Remove all harnesses connected to the circuit board. 4Take the circuit board out. Circuit Board 4-4 Humidifier Parts Humidifier function not available. 1Remove the 7 screws to remove the humidifier cover. Screw Humidifier cover 2Remove the Humidifier cover (Inner lid). Humidifier cover (Inner lid) —...
4-5 Heat exchanger for refrigerant Part 1Remove the 11 screws to remove cover (L) and cover (S). Cover (L) Screw Cover (S) (9 screws for the GUF-50RD3) 2Remove connections of themistor lead wire and lenear Screw Fixture Heat exchanger expansion valve lead wire. 3Remove the 2 screws to remove the Fixture.
Water sensor installation positions 4-6 Water sencor Part *This product is not equipped with the solenoid valve and Installed condition of GUF-100RD3 the water supply pipe. 1Remove a screw to remove the water sencor. Water sensor plate Fixing position of water sensor plate Fixing position of (GUF-50RD3)
5. Parts list Please note the following when using the parts list. 1. When ordering parts, always indicate the part number, part name, and number of parts required. 2. Parts are not always available, and it may take time for you to receive them. 3.
Page 16
Model GUF-50RD3 Parts No. Name of part Q'ty Critical Remarks Price pcs/unit for safety R50 331 067 Special nut M34 398 077 Tab washer R50 351 480 Centrifugal fan φ220 R50 478 707 Motor base M34 706 465 Special washer Y50 062 452 Motor R50 351 713 Motor fix plate H00 189 007 PTT screw 5x10...
Page 17
Air Supply fan assembly Air Exhaust fan assembly — 17 —...
Page 18
Model GUF-50RD3 Parts No. Name of part Q'ty Critical Remarks Price pcs/unit for safety R50 472 716 Damper support R50 069 156 Pull spring R50 054 225 Bush R50 232 150 Rod Y50 061 693 Damper motor cover Y50 061 260 Damper motor 220×240V H00 312 007 PTT screw 4×6 Y55 003 216 Thermistor...
Page 19
For air exhaust (RA) For air supply For air supply (OA) (OA) — 19 — — 19 —...
Page 22
Model GUF-100RD3 Parts No. Name of part Q'ty Critical Remarks Price pcs/unit for safety R50 218 067 Special nut(12) K83 466 113 Special washer(12) R50 479 480 Centrifugal fan φ245 R50 480 707 Fan base H00 189 007 PTT screw 5×10 R50 264 711 Inlet plate H00 157 008 PT screw 6×20 M34 043 080 Special washer...
Page 23
Air Supply fan assembly Air Exhaust fan assembly 58 57 — 23 —...
Page 24
Model GUF-100RD3 Parts No. Name of part Q'ty Critical Remarks Price pcs/unit for safety R50 473 715 Damper support R50 074 156 Pull spring R50 054 225 Bush R50 265 150 Rod Y50 061 693 Damper motor cover Y50 061 260 Damper motor 220×240V H00 312 007 PTT screw 4×6 Y55 004 215 Thermistor...
Page 25
For air exhaust (RA) For air supply (OA) — 25 — — 25 —...
Page 26
Printed in Japan in July, 2004 35 <MEE>...