Replacing The Propeller Blades - Propel Trampolines Star Wars 74-Z Speeder Bike Flight Manual

propeller installation
anD replacement:
your speeder bike's propeller system is a
precision instrument that may need repair or
replacement from time to time for optimal flight
function. crash landing from high-speed aerial
flights may cause damage to your propellers.
1. the ship has four propellers, two "a"
Propellers, and two "b" Propellers,
2. when installing the propeller blades, make
sure to put a propellers on a motors, and b
Propellers on b motors, as per the diagram at the
right.
3. to replace the blade, gently pull off the
broken blade and snap the new correct blade in
place by pushing down firmly.
multi-tool:
the multi-tool is used to help install and remove the propellers from the vessel.
1. to remove the propeller wedge the thin side of the multi-tool between the motor
mount and the propeller and push the propeller upwards.
2. to install the propeller use the opposite side of the multi-tool to push down
on the propeller blade. you will notice some pressure and then the blade will move
into place. the proper position of the propeller is when the base of the blade
shaft is seated slightly below the motor hole. always check to make sure that
the blade spins freely.
a
b
13
b
a