Measuring Partial Height Of A Wall - DeWalt DW0165 User Manual

6.
Point the laser toward the highest point of the
building or object whose height you need to
measure (Figure
P 1
7.
Press to measure the distance.
8.
View the height measurement at the bottom of the
screen (Figure
P 2
Distances to 2 Points
You can use the distance to two points on a wall
or object (Double Indirect Height) to determine its
height (Figure ).
Q
1.
Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2. Press (Figure
and display the red laser dot.
3.
Make sure the tool position setting (Figure
is correct for taking the measurement.
4. Select as the measurement type.
• Press to display the Main Menu
(Figure ).
E 2
• Press to select
• Press to display the Measurement Type
Menu (Figure
E 3
• Press the arrow buttons to select
• Press .
5.
Position the tool opposite the approximate
center of the vertical height to be measured
(Figure ).
Q 1
6.
Point the laser toward the lowest point of the
building or object whose height you need to
measure (Figure
Q 2
7.
Press to measure the distance.
8. From the same point, aim the laser at the
highest point of the building or object
(Figure ).
Q 3
9.
Press to measure the distance.
10.
On the bottom line of the screen, view the height
of the building or object (Figure
).
).
) toward a wall
A 1
) to turn the tool on
A 3
C 4
.
).
.
).
).
Q 4

Measuring Partial Height of a Wall

If you need to determine the height of a section of a
wall or object (e.g., the distance from the ceiling to
the top of TV or window on the wall) (Figure
1.
Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2. Press (Figure
and display the red laser dot.
3.
Make sure the tool position setting (Figure
is correct for taking the measurement.
4.
Select as the measurement type.
• Press
to display the Main Menu
(Figure
E 2
• Press to select
• Press
)
Menu (Figure
• Press the arrow buttons to select
• Press .
5.
Point the laser at the highest point of the wall or
object (Figure
6.
Press to measure the distance to the top
of the tall object.
7. From the same point, aim the laser at the top
of the obstruction on the wall or object
(Figure ).
R 2
8.
Press to measure the distance from the
top of the wall to the obstruction (TV, window,
etc.).
9. From the same point, aim the laser on a
horizontal line straight ahead toward the bottom
of the wall (Figure
10.
Press to measure the distance.
11. On the bottom line of the screen, view the
distance between the top of the wall and the top
of the obstruction on the wall (Figure
) toward a wall
A 1
) to turn the tool on
A 3
).
.
to display the Measurement Type
).
E 3
.
).
R 1
).
R 3
R 4
E
).
R
)
C 4
).
17