Measuring Volume; Turning Off The Tool; Changing The Unit Of Measure - DeWalt DW065E User Manual

• Click to display the length measurement on
the second line of the display window.
5.
View the Area measurement at the bottom of the
display window (Figure E #3).

Measuring Volume

You can measure the volume of a room or object.
1.
Click (Figure A #3) to turn on the tool.
2.
Click twice to show
window (Figure E #4).
3.
Measure the width.
• Point the top of the tool at one side of the
target (room or object).
• Position the bottom of the tool at one end of the
target and point the laser dot across the width
(Figure F #1).
• Click to display the width measurement at
the top of the display window.
4.
Measure the length.
• Position the bottom of the tool at one end of the
target and point the laser dot across the length
(Figure F #2).
• Click to display the length measurement on
the second line of the display window.
5.
Measure the height.
• Positon the bottom of the tool at one end of the
target and point the laser dot across the height
(Figure F #3).
• Click to take the measurement.
6.
View the Volume measurement at the bottom of
the display window (Figure E #3).

Changing the Unit of Measure

Once the current measurement is taken (the device is
not in Continuous Measure mode), you can change the
unit of measure from decimal ft (6.21 ft) to fractional ft
(6'02" ), fractional ft to meters (1.894 m), meters to
9/16
inches (74 in), or inches to decimal ft.
9/16
Press and hold until you see the measurement
change (2-3 seconds).
on the display

Turning Off the Tool

The tool can be turned off in either of these ways:
• Press and hold for several seconds (until the
display window clears).
• If you do not use the tool for 120 seconds, it will
automatically turn off.
Three Year Limited Warranty
DeWALT will repair, without charge, any defects due
to faulty materials or workmanship for three years
from the date of purchase. This warranty does not
cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty
repair information, visit www.DeWALT.com or call
1–800–4-DeWALT (1–800–433–9258). This warranty
does not apply to accessories or damage caused
where repairs have been made or attempted by others.
This warranty gives you specific legal rights and you
may have other rights which vary in certain states or
provinces.
In addition to the warranty, DeWALT tools are covered
by our:
1 YEAR FREE SERVICE
DeWALT will maintain the tool and replace worn parts
caused by normal use, for free, any time during the first
year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the
performance of your DeWALT Power Tool, Laser, or
Nailer for any reason, you can return it within 90 days
from the date of purchase with a receipt for a full
refund - no questions asked.
RECONDITIONED PRODUCT: Reconditioned product
is covered under the 1 Year Free Service Warranty.
The 90 Day Money Back Guarantee and the Three
Year Limited Warranty do not apply to reconditioned
product.
FREE WARNING LABEL REPLACEMENT: If your
warning labels become illegible or are missing, call
1-800-4-DeWALT or visit your local service center for a
free replacement.
E
5