Vertiv Cellcorder CRT-400 Previewer User's Manual page 34

The following table is provided for entry explanation:
Site No.
Location Name
Battery Name
Number of
Strings
String Name
Model Number
Number of Cells
Install Date
Charger
Frequency
Cell Voltage
Range
4200-040 R3
The IMPORTANT Configuration File Editor: CCF
Indicates what site is being displayed, as determined
by the location, battery and string names selected. :
Type the location name of the battery installation.
Assign a unique name to the battery. The user cannot
have two identical battery names under the same
location name. Selecting different batteries changes
choices in the String box.
Select the number of strings that are associated with
the battery.
Type a name for each string. The user cannot have
two identical string names under the same battery
name.
Type the model number of the cells or click
to open the Battery List Editor.
Refer to next section.
The default total number of cells is 256. Normally,
type the total number of cells in the string. The user
may change the number for custom configurations.
Type the battery installation date.
Selecting 50Hz or 60Hz lets the Cellcorder reject
50Hz or 60Hz ripple and harmonics.
Select the voltage range of the cells being tested.
26 4/11/2016