Vertiv Cellcorder CRT-400 Previewer User's Manual page 30

There are three ways to create an intertier configuration:
Select one or more cells in either list, then click the Add,
Remove or All button. Add moves selected cells from Available
Cells to Current Configuration. Remove moves selected cells
from Configuration to Available. All moves all cells from
Method 1
Configuration to Available. To select multiple cells, hold the
Ctrl key down and click each cell. To select a group of cells,
click the first cell in the group, hold Shift down, then click the
last cell in the group.
Select one or more cells in either list, then drag the selection
Method 2
onto the other list.
Use the Configuration Wizard to automatically create an
intertier configuration. First, click All, if necessary, to clear the
current configuration. On the Wizard, fill in the box next to the
First intertier follows cell number and the Set an intertier after
Method 3
every nn cells box. The Example area shows the start of the
sequence. Click Configure to display the results in the Current
Configuration list. The list may be edited, if needed, by using
the Add or Remove buttons.
As an example, if a 24 cell battery has intertier cells at 6, 12 and 18, enter 6 in
both edit boxes to indicate an intertier every six cells, beginning with cell
number 6.
4200-040 R3 22
Start Previewer Software
4/11/2016