Table of Contents
Advertisement
[Red & blink]: Indicates that the battery is low.
[Off]: Indicates the printer is off.
* [MODE]: Ready indicator
[Green]: Indicates that the printer is ready.
[Green & blink]: Indicates that no thermal paper is loaded or the printer
runs out of paper.
[Off]: Indicates that the printer is switched to manual feed mode.
* [FEED]: Paper test indicator
[Green]: Indicates that users can press the [FEED] button to check
whether the paper is fed normally.
[Off]: Indicates that manual mode is off.
Press the [POWER] button for 2 seconds to turn it on, the [MODE] indicator
blinks and then remains steady on. Every time you load or change the
paper, press the [MODE] button to turn the indicator off first, and then
press [FEED] to test whether paper can be fed properly. When the [MODE]
indicator is on, it shows that the printer is ready.
If "print" appears on the bottom of the screen, it means that printing
operation can be done. Tap it to start printing.
Notes:
A. Never expose the apparatus to sunshine, rain, or water.
B. Make sure that this apparatus operates in the following conditions:
• Working temperature: -10
• Working humidity: 5
Vehicle VIN Checking Terminal
o
o
C~50
C
o
o
C RH~90
C RH.
31
Advertisement
Table of Contents
