Wi-Fi Setting; Connect To A Wi-Fi Network; Disconnect From A Wi-Fi Network - LAUNCH TECH HTT User Manual

Note: Once WLAN is set as ON, e-VIN will consume more power. While
WLAN keeps unused, please turn it off to conserve battery power.
e-VIN has built-in Wi-Fi that can be used to get online. Once you're online,
you can register your e-VIN, update the diagnostic APK, browse the Internet,
get apps and send email on your network.

2.1 Connect to a Wi-Fi network

1. On the home screen, tap Settings -> WLAN.
2. Tap or slide the Wi-Fi switch to ON, e-VIN starts searching for all
available wireless LANs.
3. Choose the desired Wi-Fi access point / network:
• If the network you chose is open, you can connect directly.
• If the selected network is encrypted, you have to enter the right
security key (network password).
Once it is connected successfully, tap the Wi-Fi network from the list to view
its name, link speed, security type, IP address etc.
When this tool is in range, it will connect to the previously linked network
automatically.

2.2 Disconnect from a Wi-Fi network

1. On the home screen, tap Settings -> WLAN.
2. Tap the network with a Connected status, then tap "Disconnect".
6
Vehicle VIN Checking Terminal

2 Wi-Fi Setting