Using The Rechargeable Battery - LAUNCH TECH HTT User Manual

Note: The printer applies the thermal paper, which should be prevented from being
heated before printing, otherwise, the paper would be no longer effective or printing
results disappear.

8.3 Using the rechargeable battery

The included rechargeable battery must be installed to ensure that the
printer can print the test result normally. This printer utilizes a 7.2V,
1200mAh rechargeable Lithium battery. Do the following steps to install and
charge it:
1. Align the latches on the bottom of the battery with the holes (shown as
right) on the battery compartment.
2. Press the battery down until it is firmly fitted.
28
Vehicle VIN Checking Terminal
Fig. 8-5
Fig. 8-6