LAUNCH TECH HTT User Manual page 3

Precuations on using e-VIN
To avoid personal injury, property damage, or accidental damage to the
product, read all of the information in this section before using the product.
• Never collide, throw, or puncture e-VIN, and avoid falling, extruding and
bending it.
• Do not use e-VIN in exceptionally cold or hot, dusty, damp or dry
environments.
• Do not insert foreign objects into or place heavy objects on your device.
Sensitive components inside might cause damage.
• If the battery remains unused for a long period of time or the battery is
completely discharged, it is normal that the tool will not power on while
being charged. Please charge it for a period of 5 minutes and then turn it
on.
• DANGER: Do not attempt to replace the internal rechargeable lithium
battery. Contact the dealer for factory replacement.
• CAUTION: Please use the included power adaptor to charge your e-VIN.
No responsibility can be assumed for any damage or loss caused as a
result of using power adaptors other than the one supplied.
• Please make sure the ignition key is Off while plugging/unplugging the
diagnostic cable into/from the vehicle's DLC.
• While the e-VIN keeps unused, please set the handset in standby or OFF
mode to conserve the battery power.
• After inspection, remember to disconnect the diagnostic cable from the
vehicle.
Vehicle VIN Checking Terminal
III