Table of Contents
Advertisement
Powering the Camera via USB
The camera can be powered using mobile batteries or similar devices connected via
USB. The devices must:
Standard: Conform to the USB Power Delivery (USB PD) standard
Output:
Be rated for an output of 9 V 3 A, 15 V 2 A, or 15 V 3 A
For more information, see "6-6 Powering the Camera via USB (USB Power
Delivery)" (P. 625).
Optional AC Adapters
While inserted in the camera, batteries can be charged using an optional AC-5
AC adapter (on-board charging). The AC adapter can also be used to power the
camera. When powered by an AC adapter, the camera can be used even if no
batteries are inserted. Use only AC adapters designated for used with the camera.
The power cable supplied with the AC adapter is not to be used with other devices.
1
Confi rm that the camera is off.
2
Open the DC connector cover.
3
Connect the AC-5 by plugging the DC jack into the
camera DC connector.
• The batteries will charge while the camera is off.
• Securely close the DC connector cover when the AC adapter is not in use.
• If batteries are inserted in the camera, the CHARGE lamps light while the batteries charge.
The lamps each go out in turn as the batteries reach full charge.
• If only one battery is inserted, the camera will charge the battery in whichever bay is
occupied.
• Charging via AC adapter is available when the battery temperature is between 0 and 40 °C.
%
• The batteries will not charge while the camera is off if pictures are being uploaded to a
smartphone via Wi-Fi (background auto upload). g "Connecting When the Camera Is Off
(Power-off Standby)" (P. 590)
1
EN
35
Advertisement
Table of Contents
