Adjusting Settings In Mode - Olympus E-M1X Instruction Manual

Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure with [AUTO] selected for
[K ISO], the ISO sensitivity display will fl ash as shown.
Display
ISO-A ISO-A
L64 L64
ISO-A ISO-A
6400 6400
%
• Depending on the shutter speed selected, you may notice banding in the display caused
by fl icker from fl uorescent or LED light sources. The camera can be confi gured to reduce
the effects of fl icker during live view or when pictures are taken. g [Flicker reduction]
2
(P. 190), [K Flicker Scan] (P. 193)
• You can choose whether the display refl ects the effects of exposure settings or maintains a
constant brightness for ease of viewing. At default settings, the display maintains a constant
brightness for ease of viewing. g [Live View Boost] (P. 200)

Adjusting Settings in Mode

Use the front and rear dials to adjust the following
settings.
Front dial: Aperture
Rear dial: Shutter speed
%
• You can choose the functions performed by the front and rear dials. g G Custom Menu
J [K Dial Function] (P. 473)
• You can use the Fn lever to reverse the roles of the front and rear dials. The lever can also
be assigned other roles. g G Custom Menu J [K Fn Lever Function] (P. 475)
102 EN
K 2-8 Choosing a Shooting Mode
Overexposure.
• Choose a higher aperture value or faster shutter speed.
Underexposure.
• Choose a lower aperture value or slower shutter speed.
• If the warning does not clear from the display, choose a higher
value for [K ISO-Auto Set] > [High Limit].
M
Problem/solution