Table of Contents
Advertisement
Ninox Camera Quick Start Guide
4 Installing the Companion Software - myoResearch™ 3
To utilize the full functionality of the Ninox camera system, and ensure the system has updated drivers,
Noraxon's myoResearch 3 (MR3) needs to be installed on the computer.
Note: The Ninox camera system requires the IDS uEYE device driver which is pre-installed by the MR3
software installation. It is also available in the
4.1 Software Installation
Within the package the Ninox camera system was shipped in, there is a USB flash drive containing the
latest myoResearch 3 software.
1. Insert the MR3 USB flash drive into the PC
2. A menu will automatically pop up
3. Click on the Noraxon installation file and follow the Wizard's instructions
4. After installation, an icon will be created on the desktop
4.2 Companion Software Activation
The installed companion software must be activated before unrestricted use is possible.
1. Open MR3
2. A dialog box will indicate how many more times MR3
can be opened
3. Click on "Activate"
4. Enter the License ID provided on your USB flash drive
and press "OK"
- Continued on next page -
5. If you have an internet connection, click Activate by
Internet for immediate activation
6. Alternatively, email the provided activation ID to
activation@Noraxon.com
or respond by phone with the Activation Code. Enter
the provided Activation Code to remove any restrictions on use.
(Rev A)
Downloads Section
Noraxon Support will email
of the Noraxon website.
8
Advertisement
Table of Contents
