Table of Contents
Advertisement
Ninox Camera Quick Start Guide
Welcome from Noraxon
Congratulations on acquiring your new Ninox Camera System!
This guide will provide you with step by step instructions on how to install your new
hardware and software, adjust device settings, and record your first data set.
Let's begin by walking through how to install your new hardware.
Note: This is not meant to be a complete manual, but a guide to help you get started with your system. For
more detailed instructions on operating the Ninox Camera System and its features please refer to the
complete Ninox User Manual, also included with your system.
1 System Unboxing
The Ninox camera system is packed within a reinforced padded box for storage and protection during
transport. Upon arrival, carefully remove all contents and verify the following components are present.
Contents will vary depending on the purchased package.
Figure 1 - Ninox camera
Figure 2 - USB3.0 cable with sync (part #CBL31)
Ninox 125 (part #140)
Ninox 300C (part #143)
Figure 3 - MyoSync station (part #262)
Figure 4 - USB cable for MyoSync station (CBL2)
Optional contents not illustrated:
Accessory lens (Ninox 300c only)
15m USB3.0 extension
Tripod
2
(Rev A)
Advertisement
Table of Contents
