Recording A Measurement - Noraxon Ninox 125 Quick Start Manual

Ninox Camera Quick Start Guide
Step 4
Click on OK (in the bottom of the dialog box)
when done.

6 Recording a Measurement

Step 1
Within the Home screen, click on the myoVIDEO
module icon.
Create a New Subject
Select New Configuration New Configuration New Configuration. . . . New Configuration
Step 2
Insert the devices to be used for the measurement
into the configuration by dragging a device in from
the list of A A A A vailable vailable vailable vailable D D D D evices evices. evices evices
You may configure lens correction, image quality,
resolution, video speed, and other settings here.
Refer to the Ninox User Manual for information on
these settings.
Continue to the next step by selecting Measure.
Step 3
After checking for normal video display, you are
ready to record a measurement. Select Record
the top left of the screen and begin your protocol.
After completing your record, select Stop
Save the record as the name of your configuration,
or type in a new name. After this, save your record
or Discard & measure again. Discard & measure again. Discard & measure again. Discard & measure again.
(Rev A)
Measure. Measure. Measure.
Record at
Record Record
Stop and Save Stop Stop Save. Save Save
10