Installing And Connecting The Drain Hose Of The Indoor Unit - Samsung AM***MNVD Series Installation Manual

Installing and connecting the drain hose of the indoor unit

Wall
Indoor unit
Drain hose
1.97
inch
(5cm)
less
Keep a clearance of at least
1.97 inch (5 cm) between
the end of the drain hose
and the ground.
1) Correct connection
Drain hose
Pipe
CAUTION
Drain hose installation
1. If necessary, connect the 6.56 ft (2 meter) extension drain hose to the drain hose.
2. If you use the extension drain hose, insulate the inside of the extension drain hose with a shield.
3. Fit the drain hose into 1 of 2 drain hose holes, then fix the end of the drain hose tightly with a clamp.
4.
each side of connection by 0.79 inch (20 mm) .
The drain hose must NOT
slant upwards.
Ditch
Do not place the end of the
drain hose in a hollow.
2) Incorrect connection
Drain hose
English-13
The end of the drain hose
must NOT be placed under
water.
Pipe
The drain hose must not
be bent.
After completing the
installation of the drain
hose, pour water into
whether the hose is well
drained.
Drain hose hole