Advertisement
Quick Links
Troubleshooting
If problem cannot be corrected, consult your dealer/Homecare equipment provider.
PROBLEM
PROBABLE CAUSE
A. No flow
1. Cylinder valve closed
2. Conserver in "OFF"
position
3. Cylinder empty
4. Dial not at setting
5. Conserver not sensing
breath
B. Leaking at Yoke
1. Missing or defective
Yoke Seal
Precision Medical, Inc.
300 Held Drive • Northampton, PA 18067
800-272-7285 • 610-262-6090 • fax: 610-262-6080
Setting up your
REMEdy
1. Turn on cylinder
2. Set to prescribed
setting
3. Replace cylinder
4. Set dial so indicator
points to a setting
5. Check position of
cannula in nose
Do not breathe
through mouth
1. Replace Yoke Seal
504345rev3 25M 9/07 Printed in USA
Quick Start Guide only
Refer to EasyPulse5 User Manual for complete operating instructions, warnings and cautions.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Precision Medical EasyPulse5
Summary of Contents for Precision Medical EasyPulse5
-
Page 1: Troubleshooting
Yoke Seal Quick Start Guide only Precision Medical, Inc. Refer to EasyPulse5 User Manual for complete operating instructions, warnings and cautions. 300 Held Drive • Northampton, PA 18067 800-272-7285 • 610-262-6090 • fax: 610-262-6080 504345rev3 25M 9/07 Printed in USA... - Page 2 EasyPulse5 Oxygen Conserving Regulator (Conserver) Carry Oxygen When using a Precision Medical Carry Bag, slide the cylinder into Cylinder Contents the bag with the gauge facing the mesh. Attach the cannula to the Gauge T-Handle (if equipped) Conserver’s Cannula Connection.
Need help?
Do you have a question about the EasyPulse5 and is the answer not in the manual?
Questions and answers