Installation Of The Media Block - GDC LPU-1000 Installation Manual

2. ASSEMBLY OF THE MEDIA BLOCK IN THE LED PLAYER UNIT

2.3.2 Installation of the Media Block

1. Remove the media block supporting metal stand, by unscrewing the two screws indicated below.
2. Put the supporting metal stand at the back of the media block. Install by screwing in the indicated
positions below.
→
Important Note:
Check and make sure that the supporting metal stand is flat, and avoid physical damages or
deformities.
INSTALLATION MANUAL FOR LPU-1000 LED PLAYER UNIT
→
→
-20- 26 Feb 2018