Map Share; About Map Share; Creating A Map Change Report - TomTom GO Basic User Manual

Map Share

About Map Share

You can report map changes using Map Share. These map changes are then shared with other
TomTom device users when they receive a map update.
There are two ways to report a map change:
Select a location on the map and create the change report immediately.

Mark a location and create the change report later.

To send your map change reports to TomTom, you must connect your TomTom GO to your computer
and use MyDrive Connect.
All map changes are verified by TomTom. These verified changes are then available as part of the
next map update which you can get when you connect your device to
connection.
Tip: If a road closure is reported using Map Share, the closure is verified and immediately shown
by TomTom Traffic.

Creating a map change report

Important: For safety reasons, do not enter the full details of a map change while you are driving.
You can always mark the location
To create a map change report, do the following:
1. Press and hold to select the location of the map change on the map view.
2. Select the pop-up menu button to open the menu.
3. Select Report Map Change from the pop-up menu.
4. Select the type of map change you want to apply.
and create the report later.
62
MyDrive Connect using a USB