Confi Rming The Fi Rmware's Number After Upgraded - Denon AVR-1611 Service Manual

8. Notice:
Please keep the following notice for fi rmware update.
(a) Keep the PC environment
(b) Avoid the communication cable from the electrical noise source.
(e.g. telephone cable, AC line, a fl uorescent light)
(c) Don't remove cable during update.
(d) Don't turn off the power during update.
(e) Don't run other PC application during update.
(f) Stop the resident program on PC (Virus checker and System check utilitu, etc)
(g) Stop the screen saver on PC.
(h) Stop the power save ability on PC.
(i) In case of laptop PC, Use the AC adaptor.
Confi rming the fi rmware's number after upgraded
After completion of the updating operation, the new version number can confi rmed by starting up the AVR1611 or AVR591
according to the following procedure.
With the following operation, the AVR1611 or AVR591 can be set to the Flash ROM Version-Number Confi emation mode.
Turn on power switch while simultaneously pressing "DIMMER" and "STATUS" buttons on the front panel. Every time the
"STATUS" button is pressed, version number of the Model, Main, Sub, ... are indicated on the front panel section in the
following order.
Depression
1
2
3
4
5
6
7
8
Button Name
STATUS Model Name
STATUS Main CPU
STATUS -
STATUS Sub CPU
STATUS -
STATUS DSP ROM
STATUS Audio PLD
STATUS iPod Dock
Remarks
A V R 1 6 1 1 _ * * * * * * _ _
A V R 5 9 1 _ _ * * * * * * _ _
_ M a i n _ _ _ _ _ : * * . * *
_ M a i n _ F B L _ : * * . * *
_S u b _ _ _ _ _ _ : * * . * *
_ S u b _ F B L _ _ : * * . * *
_ D S P _ _ _ _ _ _ : * * . * *
A _ P L D _ : A * * * * * * *
_ D o c k _ V e r _ : * * . * *
25