Precautions
•
The unit is designed for use in ambient temperature range
of 0°C to 50°C (32°F to 122°F).
•
Do not place the unit on or near heat sources, such as
lighting equipment, power amplifiers, or in a place subject
to direct sunlight or excessive moisture. In such places,
the external finish or internal parts of the unit may be
damaged.
•
If the unit is used in a very humid or dusty place or in a
place subject to an active gas, clean its surface as well as
the connectors with a dry, soft cloth soon after use.
Lengthy use of the unit in such places or not cleaning it
after its use in such places may shorten its life.
•
When cleaning the unit, never use organic solvents such
as thinners or benzine, which will damage the finish of the
unit.
•
The unit has been factory adjusted precisely. Do not
tamper with its internal parts or attempt to repair it.
8
Parts Identification
Wire antenna
1
MONITOR
connector
2
OUTPUT (BAL)
connector
3
Display section
RF TX BA
TT
RF
AF
BA TT
4
GP
SET button
CH
5
MODE button
6
POWER switch
Battery holder
7
RF indicator
8
TX BATT indicator
O N
9
MUTING switch
O F F
IN G
M U T
q;
+/– buttons
qa
MONITOR control