Sony WRR-805A Operating Instructions Manual page 13

When no button is pressed for more than 30 seconds, the
group selection mode or the subsequent wireless channel
selection mode is automatically released.
5
Once the desired group indication appears, press the SET
button.
The group selected is set.
The tuner now enters the wireless channel selection
mode, and both of the TV channel number and two digits
number flash on the display.
In channel selection mode
6
Press the + or – button to select the channel.
Pressing the + button cyclically changes the channel
indication in the order shown in the table of the selected
group in "Wireless Channels Selectable" on page 5 to 7.
Pressing the – button changes it in the reversed order.
If you keep either button pressed, the channel number
will be incremented or decremented continuously.
Example: when the group 00 is selected
7
Once the desired wireless channel is displayed, press the
SET button.
The display stops flashings, and the selected group and
wireless channel are stored in memory.
To select the channel by frequency indication
1
Turn on the unit and press the MODE button until the
frequency indication appears on the display.
2
Press the SET button.
The frequency indication starts flashing.
In frequency selection
mode
3
Press the + or – button to select the channel frequency.
4
Once the desired frequency is displayed, press the SET
button.
The display stops flashing, and the selected channel
frequency is now stored in memory.
13