Sherwood RX-4503 Operating Instructions Manual page 17

RX-4503(A) 2008.8.12 3:43 PM 페이지 18
Manual presetting
• You can store up to 30 preferred stations in the memory.
1.
Tune in the desired station with auto or manual tuning.
2.
Press the MEMORY button.
3.
Select the desired preset number (1~30) and press the MEMORY button.
4.
Repeat the above steps1 to 3 to memorize other stations.
MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off, are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations,etc.
Tuning to preset stations
• After selecting the tuner as an input source, select the desired preset number.
• "MEM" is flickering for several seconds.
MEM
• When using the NUMERIC buttons on the remote control.
Examples) For "3" :
• The station has now been stored in the memory.
• When using the NUMERIC buttons, the station is stored
automatically without pressing the MEMORY button.
• A stored frequency is erased from the memory by storing
another frequency in its place.
• If "MEM" goes off, start again from the above step 2.
• When using the NUMERIC buttons on the remote control.
Examples) For "3" :
18
For "15" :
For "30" :
For "15" :
For "30" :