Sherwood RX-4503 Operating Instructions Manual page 14

Am/fm stereo receiver
Table of Contents

Advertisement

RX-4503(A) 2008.8.12 3:43 PM 페이지 15
Selecting a surround sound mode
Surround sound modes
• Dolby Virtual Speaker
This mode creates a virtual surround sound field using as few as two front speakers and subwoofer, allowing you to
experience listening from 5.1 channel speakers.
* Dolby Virtual Speaker Reference("DOLBY VS REF")
The width of the front sound image is defined by the actual distance between front speakers.
* Dolby Virtual Speaker Wide("DOLBY VS WIDE")
The width of the front sound image seems to extend beyond the front speakers.
• Dolby Headphone("DOLBY HP")
This mode simulates 5.1 channel surround sound, which allows you to enjoy 5.1 channel surround sound through 2 channel
headphones, just like listening from 5.1 channel speakers.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
2CH downmix mode
• This mode allows the multi-channel signals from the EXTERNAL INs to be mixed down into two front channels and to be
reproduced through front speakers or headphones.
Adjusting the channel level
1.
Select the desired channel.
2.
At each channel, adjust the level as desired.
3.
Repeat the above steps 1 and 2 to adjust each channel level.
• Each time this button is pressed, the mode changes as
follows :
(DOLBY VS REF
DOLBY VS WIDE) or <DOLBY HP>
STEREO or 2CH DOWNMIX
( ) : Possible only when listening via the speakers.
< > : Possible only when listening via the headphones.
: Possible only when selecting the EXTERNAL IN as an input source.
• On the remote control, press the "
the STEREO button depending on whether listening in a
surround mode or in the stereo mode.
• Each time this button is pressed, the channel is
selected as follows:
→ FL
FR ( → SW )
(Front L)
(Front R)
(Subwoofer)
( ) : Possible only when listening via the speakers.
• When the channel display disappears, press this button
again.
• The channel levels can be adjusted within the range of -15
~ +15 dB.
• In general, we recommend the level to be adjusted to 0 dB.
15
" button or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents