Sherwood RX-4503 Operating Instructions Manual page 15

RX-4503(A) 2008.8.12 3:43 PM 페이지 16
Adjusting the tone (bass and treble)
1.
Select the desired tone mode.
When the TONE is set to ON to adjust the tone (bass and treble).
2.
Adjust the tone (treble and bass) as desired.
• Each time this button is pressed, the tone mode is
selected as follows :
OFF : To listen to a program source without the tone effect.
("DIR" indicator lights up.)
ON : To adjust the tone for your taste.
("DIR" indicator goes off.)
Note :
• When the EXTERNAL IN is selected as an input source,
the TONE cannot be set to ON.
• The tone level can be adjusted within the range of -12 ~
+12.
Notes :
• Extreme settings at high volume may damage your
speakers.
• In general, the bass and treble levels are adjusted to 0.
16