Polaris Alpha User Manual page 49

2. Configure the input stream options as follows. Press the OK button to return to the STRSVR
dialog when finished.
Field
Port
Bitrate (bps)
Byte Size
Parity
Stop Bits
Flow Control
3. Setup an output stream of type "NTRIP Server" and press the "Opt" button to set the output
stream options.
Description
Select the COM port for base data input
Serial port data input bit rate.
Byte Size depends on serial settings.
Parity depends on serial settings.
Stop Bits depends on serial settings.
Flow control depends on serial settings.
Table A-2-1
Figure A-2-3
Figure A-2-4
49
Example
COM7
115200
8 bits
None
1 bit
None