Table of Contents
Advertisement
After completing adding, the system continues to stay at "Auto Search" interface.
You can continue to add more devices, or click "Cancel" to exit "Auto Search"
interface.
After completing adding, Smart PSS logs in the device automatically. In case of
successful login, online status displays "Online". Otherwise, it displays "Offline".
Icon
and
3.2.2 Manual Add
To add devices, device IP address or domain name shall be known first.
Step 1 In "Devices" interface, click "Add", as shown in Figure 3-5.
The system pops up "Manual Add" interface, as shown in Figure 3-6.
Figure 3-4
Table 3-1
Description
Click this icon to enter "Modify Device" interface and modify device
info, including device name, IP/domain name, port, user name and
password.
Alternatively, double click the device to enter "Modify Device"
interface.
Click this icon to enter "Device Config" interface and configure device
camera, network, event, storage and system info.
When the device is online, the icon is
login, and this icon turns to
When the device is offline, the icon is
(with correct device info), and this icon turns to
Click this icon to delete the device.
Figure 3-5
. Click this icon to exit
.
. Click this icon to login
.
Smart PSS Config 14
Hide quick links:
Advertisement
Table of Contents
