Reliability
The display MTBF is to be greater than 50,000 hours at 120 Hz with a 90%
confidence level at 25°C.
Safety and EMI Performance
The display will not inhibit the end product from obtaining certifications under
UL1950, CSA22.2 No. 950, and EN60950. The display will not inhibit the end
product from complying with FCC Part 15, Subpart J, Class B or EN55022 Class
B when housed in a suitable enclosure.
Mechanical Characteristics
Table 10. Mechanical Characteristics.
Display External Dimensions
millimeters (inches)
Weight (typical)
Fill Factor
Display Active Area
millimeters (inches)
Pixel Size
millimeters (inches)
Component Envelope
The component envelope shown in Figure illustrates the distance
components extend behind the display. Tall components do not necessarily fill
this area. Planar reserves the right to relocate components
constraints of the component envelope without prior customer notification.
For this reason, Planar advises users to design enclosure components to be
outside the component envelope. Device designers will need to consider their
specific system requirements to determine the spacing necessary to maintain
the specified ambient temperature. Air flow and surrounding component
materials will affect the depth of the air gap.
width
260.0 (10.24)
height
104.1 (4.09)
depth
19.0 (0.75)
306g (10.79 oz)
59.3%
width
211.17 (8.31)
height
79.17 (3.12)
diagonal
225.52 (8.87)
width
.25 (0.009)
height
.31 (0.012)
EL640.200-SK Operations Manual (020-0348-00B)
within
the
15