Adjusting The Bobbin Winder; Adjusting The Tension Assemble Thread Guides For Proper Fill - Quilter's Pro Deluxe User Manual

Adjusting the Bobbin Winder Lever (Amount of Fill on the Bobbin)
Step 1: Using your allen wrench loosen the set screw (A)
holding the bobbin winder Lever (B) in place. See figures
98 and 99
Note: you do not need to pull the bobbin winder out to
adjust this setting.
Step 2: Move the bobbin winder lever in for less fill and out
for more fill
Figure 98
Step 3: Tighten set screw (A) to prevent bobbin winder lever
(B) from moving
Figure 99
Adjusting the Tension Assembly Thread Guides for Proper Fill
Step 1: Loosen the set screw (D) so that you can adjust the
tension assembly thread guides (E). Adjust tension assembly
thread guides (E) up and down until bobbin fills evenly top to
bottom. See figure 100
Step 2: Tighten the set screw.
E
D
Figure 100
30
| User Guide