How Do I Make Adjustments To Make The Perfect Stitch - Quilter's Pro Deluxe User Manual

How do I Make Adjustments to Make the Perfect Stitch?

Understanding how your long arm machine makes a stitch will help you make the proper adjustments to
make the perfect stitch. The technique all long arm machines use to make a stitch is basically opposite
of the home sewing machine. The home sewing machine is designed to press together two layers of
fabric and sew while the fabric is held in place by the presser foot. Long arm machines are designed to
press and sew multiple layers together while the machine head is moving. The difference is that there is
practically no needle deflection on a standard sewing machine and a large amount of needle deflection
on the long arm. The higher the tension, the more the needle will deflect. Another cause for the needle
to deflect on a standard machine is the type of fabric being sewn. A tightly woven fabric tends to force
the needle in different directions as it penetrates the fabric. This type of deflection depends greatly on
the type of needle and type of point you use, such as a ball point or sharp point.
Needle deflection, what is needle deflection? What causes needle deflection? How is needle
deflection related to the stitches on my quilt?
On a long arm quilting machine a stitch is mechanically created the same as a home sewing machine
except the quilter is the feeddog moving the machine head over the fabric. The hopping foot presses
the fabric together tighter and quicker than a home sewing machine presser foot because the fabric
must be able to slide between the foot and the needle plate as the machine is sewing. This means that
the machine is moving while the needle is in the fabric. The worst thing for a needle is to be in the fabric
while the machine is moving which bends the needle, creating needle deflection.
Good stitches will interlock in the batting between the quilt top and backing. In real life, this goal is rarely
achieved. For this reason, you need to be aware that you will have "pokies" if you use different colors of
thread on top and in the bobbin. Pokies are where you can see tiny dots of the contrasting thread where
the bobbin catches the top thread. If there is slightly more tension on the top than on the bottom, then
you will see the pokies on the top side of the quilt. If the greater tension is on the bobbin, then you will
see the pokies on the back of the quilt. If the pokies are objectionable to you, use the same color thread
on both top and bottom.
TIP: A general rule of thumb is that if the stitch looks bad on the top it is the bottom tension. If
the stitch looks bad on the bottom it is the upper tension. The upper and lower threads play tug of
war with each other.
24
| User Guide