Advertisement
EN /
1
Changing the resolution
The resolution of the mouse sensor determines how quickly and precisely it reacts
to the movements of the mouse. This wheel is used to adjust that setting.
Once you turn the wheel, the light effect on your mouse starts blinking, in order to
signalize the change of the resolution. As long as it is blinking the color of the light
now indicates the selected resolution:
- Yellow: 400 dpi
- Orange: 600 dpi
- Red: 800 dpi (Default)
- Blue: 1200 dpi
- Green: 2000 dpi
- Purple: 4000 dpi
- White: 5000 dpi
Once you've selected your desired resolution, the lights stops blinking after 3sec.
It will change back to the original backlight color, indicating that the selection
process is finished.
2
Changing the polling rate
The polling rate of a USB device determines how often the PC requests a data
update (in this case the mouse position and button state) from a connected device.
The regular USB polling rate is 250Hz, but you can increase this rate, exceeding
USB standard specifications. The options are:
- 250Hz, USB data packet sent every 4ms (USB standard)
- 500Hz, USB data packet sent every 2ms
- 1000Hz, USB data packet sent every millisecond
3
Changing the color of the light effect
This wheel lets you choose the color of the light effects on the mouse.
4
Switching between left / right hand mode
The "L/R" switch activates the two additional buttons on either the left or the right
side of the mouse. The non-selected buttons are then deactivated.
I
Top covers
This mouse is supplied with three top covers. The covers are in different sizes to
best match with the shape of your hand. Simply slide off the cover and replace
with the chosen size.
Advertisement
