Humminbird ChartSelect User Manual page 6

3 | Update your Control Head Software to Display Purchased Charts
To display LakeMaster and AutoChart charts, you will need the most up-to-date software on your Humminbird control head. See your
control head operations manual for additional information about updating software.
NOTE: It is important to install the latest software update on your control head to enable all FishSmart features. For the latest software
update, visit our Web site at humminbird.com.
Compatibililty: Visit our Web site at humminbird.com for the latest list of compatible models.
Supplies: In addition to your Humminbird equipment, you will need a PC with Internet access and a blank SD or microSD card.
1. Before the control head software is updated or restored to system defaults, export your
navigation data and copy your screen snapshots to an SD or microSD card. See your
control head operations manual for instructions.
WARNING! Humminbird is not responsible for the loss of data files (waypoints, routes, tracks,
groups, snapshots, recordings, etc.) that may occur due to direct or indirect damage to the
unit's hardware or software. It is important to back up your PC and control head data files
periodically.
2. SD Card: Install a blank SD card into the PC card slot.
microSD Card: Install a formatted microSD card into the adapter, and insert it into the slot
on your PC.
3. Go to humminbird.com, and select My Humminbird to sign in to your account.
4. Select the My Equipment tab. The available software updates are listed as Downloads
under each registered product.
• Under Downloads, click the file name.
• Read the instructions in the dialog box and select Download.
• Follow the on-screen prompts to save the software file to the SD or microSD card.
5. Power on your Humminbird control head. Start Normal mode.
6. SD Card: Insert the SD card with the updated software file into the control head card slot.
microSD Card: Remove the microSD card from the adapter and install the card into the
control head card slot.
7. Follow the on-screen prompts to update the control head software.
8. When the software update is complete, remove the SD or microSD card from the control
head card slot.
Preparation 3
Inserting a microSD Card
into the Adapter
Inserting a microSD Card
into the Card Slot
Inserting an SD Card into the Card Slot