Remote Control - Sharp XL-DH259P Operation Manual

System connections (continued)
Make sure to unplug the AC power cord before making any connections.
AM loop
antenna
Installing the AM loop
antenna
< Assembling >
< Attaching to
the wall >
Wall
Screws
(not supplied)
Volume control
The sound level at a given volume setting depends on
speaker effi ciency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs while turning the unit on with the volume control
setting up high, or while continually listening at high
volumes. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Speaker connection
Use speakers with an impedance of 4 ohms or more,
as lower impedance speakers can damage the unit.
Do not make a mistake when connecting the right and
left speakers. The right speaker is the one on the right
side when you face the unit.
Insert the speaker plug fully with the lever side facing
to the left.
Hold the speaker plug when removing it from the unit.
Pulling the wire may cause malfunction to the unit.
Do not allow any objects to fall into or to be placed in
the bass refl ex ducts.
Do not stand or sit on the speakers. You may be
injured.
LEFT
RIGHT
SPEAKERS

Remote control

Battery installation
Use 2 "AAA" size batteries (UM/SUM-4, R3, HP-16 or
similar). Batteries are not included.
Plastic fi lm covering can be removed or peeled off.
1
Open the battery cover.
2
Insert the batteries according to the direction indicated
in the battery compartment.
When inserting or removing the batteries, push them
toward the battery terminals.
3
Close the battery cover.
Caution:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for a long
period of time. This will prevent potential damage due to
battery leakage.
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Installing the batteries incorrectly may cause the unit to
malfunction.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fi re or the like.
E-4
Video cable
TV
(not supplied)
To video input jack
Wire
Plug in with the
lever side facing
to the left.
FM antenna
External FM antenna
for better reception
(not supplied)
AC outlet
(AC 120 V ~ 60 Hz)