Transferring A Phone Book; Transferring Select Phone Book Data - UTStarcom UT618 User Manual

10-4 Group
3. Press

10.4 Transferring a Phone Book

• To use "Transfer" feature, you need to set a group and then switch to
• Send and receive data includes the following information:
Parameter
Name
Phone number
Phone Type
Email address
Type
10.4.1

Transferring select Phone Book data

• Select the phone book you want to transfer and follow the steps below:
1. Press
• If there is no phone book data or if the phone is not under "Transfer" mode, all
the items are grayed out and cannot be selected.
2. Press
• "New", "Favorite Call", "Secret", "Editing Data" and "Delete All" are
grayed out and cannot be selected.
3. Press
4. Press
selected data will have a "√" in the frame.
• To select several data, please press
• To cancel the selection, please press
5. Press
number you and the receiver belong to.
6. Press
7. Enter the transceiver number
begins to transfer the selected phone book data.
• The number of selected data and the number of transferring data will be
indicated on the right side of the screen.
• "End Transfer" will be displayed once the transferring is complete.
to terminate the call; "End Call" will be displayed.
"Transfer" standby mode.
Details
16 characters or 32 alphanumeric characters
32 numeric characters
Regular phone, PHS, GSM, pager, fax, 3G, office, none
64 English characters
0~8 (except for secret phone number)
, to display the "Transfer" screen.
to select "PhoneB.Appo"; the phone book menu is displayed.
to enter "Name Search"
to select the data you want to transfer
, "PhoneBook Tras." screen is displayed
, to display "Transceiver No." input screen.
press to display the data.
press
and repeat this step.
again.
press
press , to display "Transferring". The phone
UT618 User Manual
to confirm it. The
to select the group