Radio; Timer And Sleep Operation - Sharp SD-EX200 Operation Manual

Timer and sleep operation (continued)
SD-EX200
Sleep operation
The radio and CD can be turned off automatically.
1
Play back the desired sound source.
2
Press the TIMER button.
3
Within 10 seconds, press the
CURSOR ( or ) button to select
"SLEEP".
4
Within 10 seconds, press the EN-
TER button.
5
Press the CURSOR ( or ) but-
ton to specify the sleep time.
6
Press the ENTER button.
7
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
24
(Maximum: 2 hours - Minimum: 1
minute)
To confirm the remaining sleep time:
1 Press the TIMER button while the sleep timer is set.
2 Within 10 seconds, press the CURSOR (
or ) button to select "SLEEP".
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time while it is displayed by pressing the
ENTER button (steps 5 - 6).
To cancel the sleep operation:
The sleep timer is canceled when the unit enters the power stand-by mode.
To cancel only the sleep timer without setting the unit to the power stand-by mode,
proceed as follows.
1 Press the TIMER button while the sleep timer is set.
2 Within 10 seconds, press the CURSOR (
or ) button to select "SLEEPOFF".
3 Within 10 seconds, press the ENTER but-
ton.
To use timer and sleep operation together
Example: You can fall asleep to the radio and wake up with the sound from a CD.
1 Set the sleep time (steps 1 - 6, page 24).
2 Set the timer playback (steps 1 - 12, pages
22 - 23).
1.Sleep timer setting
2.Timer playback setting
1 minute - 2 hours
Sleep operation will
automatically stop.
Remaining sleep time
End time
Desired time
Timer playback
start time