System Connections - Sharp SD-EX200 Operation Manual

System connections

SD-EX200
FM antenna
Right speaker
How to open side covers
Open the right and left side covers to connect the system.
12
AM loop antenna
Bass Reflex Duct
Speaker connection
Make sure to unplug the AC power cord before connecting the speaker
wires.
Connect the speaker wires to the speakers first, then to the unit.
This prevents short circuit between
Connect the wire with the black line to the (-) and the transparent one to the (+).
Left speaker
Right speaker
Black line
Caution:
Use speakers with an impedance of 4 ohms or more, as lower impedance speak-
ers can damage the unit.
Do not mistake
speaker is placed on the right when you face the unit.)
Do not let the bare speaker wires touch
each other.
Do not short-circuit the speaker wires. If
the power is turned on, malfunction may
occur.
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may
be injured.
Note:
There is no physical distinction between the
right and the left speakers.
and terminals.
Transparent Black line
3
1 2
Transparent
Black line
and , and right and left terminals of the speaker wires. (The right
Incorrect
Left speaker
Left speaker
Transparent
Incorrect
Right speaker