Troubleshooting - Technogym SYNCHRO User Manual

Troubleshooting

Below is a list of problems that may arise during normal use of the equipment. If the described remedies do not solve the problem, contact the Technical
Support Service. f
Problem Cause
Equipment doesn't switch
Mains power failure (mains powered version).
on
Power supply cable damaged (mains powered version).
Installation problems with the power supply cable (mains
powered version).
Burnt-out fuses (mains powered version).
The control panel connector has been accidentally
disconnected.
Too noisy
Equipment not properly levelled.
Damaged bearings.
Worn belt.
Data incorrect or unreliable Equipment next to source of radio interference (e.g.
with equipment running electrical domestic appliances).
Remedy
Check the power supply at the wall socket used by the
equipment by plugging in an appliance that definitely
works.
Contact the Technogym Technical Support Service.
Check the connection.
To replace the blown fuse with a spare contact Technogym
Technical Support Service.
Contact the Technogym Technical Support Service.
Check the position and level the adjustment feet.
Contact the Technogym Technical Support Service.
Contact the Technogym Technical Support Service.
Move the equipment to another place or move the
domestic appliances.
25
Synchro Excite