Table of Contents
Advertisement
CD-ESgO0
CD-ES99
24
Recording
on a cassette tape
•
Various
tape
functions
Function
Main unit
Remote
control
Play
(23
Stop
_
[]
(23
Fast for-
_
._
ward/Fast
I\
_
rewind
(TAPE 2 only)
_
v
(Z)
Operation
Press in the stop
mode.
Press in the playback,
fast forward
or fast re-
wind mode.
Press in the playback
or stop mode.
Caution:
• To remove the cassette, press the [] button, and then open the
compartment.
• Before changing from one tape operation to another, press the []
button.
• if a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door witl not
open. In this case, wait until the power is restored.
Before recording:
• When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
• SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
• The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
• For recording, use only normal tapes. Do not use metal or
CrO_ tapes.
Erase-prevention tab of cassette
tapes:
• When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
• To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Tab for side B
Tab for side A
Advertisement
Table of Contents
