Sharp CD-ES900 Operation Manual page 29

Sharp home theater system user manual
Hide thumbs Also See for CD-ES900:
Table of Contents

Advertisement

CD-ESg00
CD-ES99
12When
the preset time is reached, playback or recording will
start.
The volume will increase gradually until it reaches the preset
volume.
13When
the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer will operate at the same time every day. it will contin-
ue until the daily timer setting is canceled. Cancel the daily timer
when it is not used.
Note:
When performing timer playback or recording using another unit con-
nected to the GAME INPUT jacks, select "GAME" in step 9.
This unit wil! turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
Checking the timer setting in the timer stand-by mode:
t Press the CLOCK/TIMER button.
2 Within I0 seconds, press the I_ _
or _
_
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within I0 seconds, press the M_ _
or _,_ _=,_1 button to select
"ONCE CAL" or "DAILY CAL", and press the MEMORY/SET but-
ton.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Canceling
the timer
setting
in the timer
stand-by
mode:
I
Press the CLOCK/TIMER
button.
2
Within
I0 seconds,
press
the _
_1_ or _
_
button
to select
"ONCE"
or "DAILY",
and press the MEMORY/SET
button.
3
Within
I0 seconds,
press
the I,_,,q_
or _-
_'_1 button
to select
"ONCE
OFF" or "DAILY
OFF", and press
the MEMORY/SET
but-
ton.
Timer will be canceled
(the setting will not be canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
I Turn the power on and press the CLOCK/TIMER button.
2 Within I0 seconds, press the I'q,,_ ,_ or _
_
button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within I0 seconds, press the _
_
or _'_ _-_ button to select
"ONCE ON" or "DALLYON", and press the MEMORY/SET button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
Note:
The timer can also be set with the remote control.
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cd-es99

Table of Contents