Table of Contents
Advertisement
CD-ESg00
CD-ES99
•
Antenna connection
Supplied
FM antenna:
Connect
the FM antenna
wire to the
FM 75 OHMS
terminal
and
position
the FM antenna
wire in the direction
where
the strongest
signal
can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM LOOP jack. Position the
AM loop antenna for optimum reception. Place the AM loop antenna
on a shelf, etc., or attach it to a stand or a wal! with screws (not sup-
plied).
i' ii'i II :II!
Note:
Placing
the antenna
on the unit
or near the AC power
cord
may
cause noise
pickup.
Place the antenna
away from the unit for better
reception.
Installing
the AM loop
antenna:
< Assembling
>
< Attaching to the wall >
Wall
Screws (not supplied)
•
Speaker
connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
t_--
Red
_.
_
Black
Use speakers
with an impedance
of 6 ohms or more, as lower im-
pedance
speakers
can damage
the unit.
Do not mistake
the right and the left chan-
nels. The right speaker
is the one on the right
side when you face the unit.
Do not let the bare speaker
wires
touch
each other.
Do not allow any objects
to fall into or to be
placed
in the bass reflex ducts.
Do not stand or sit on the speakers.
You may
Incorrect
be injured.
•
Placing the speaker system
The left and right speakers
have individual
shapes.
For best perfor-
mance,
place the speakers
according
to the diagram
below.
Left speaker
Right speaker
Note:
The speaker
grilles
are not removable.
11
Advertisement
Table of Contents
