General Control - Sharp CD DHS1050P Operation Manual

General control

POWER
ON/ STAND-BY
5
4
3
2
1
iPod/iPhone
MINI COMPONENT SYSTEM
TIMER
POWER
ON/ STAND-BY
VOL.
iPod/iPhone
CD
CD
TUNER
(BAND)
TAPE
TUNING
AUDIO IN
USB
TUNER
(BAND)
TAPE
AUDIO IN
USB
X-BASS
BASS/TREBLE
TUNING
FOLDER
DIMMER
CLOCK/TIMER
DEMO
MUTE
DEMO
MUTE
To turn the power on
The fi rst time the unit is plugged in, the unit will enter the
demonstration mode.
Function Main unit
Power on/
POWER
ON/ STAND-BY
off
____
Demo on/
off
Display brightness control
To dim the display brightness, press the DIMMER button
on the remote control.
Volume auto fade-in
If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 16 and fades in to the
last set level.
Volume control
Turn the volume knob toward VOL +/– (on main unit) or
press VOL +/– (on remote control) to increase or decrease
the volume.
CD-DHS1050P
REMOTE
SENSOR
VOL.
OPEN / CLOSE
VOL.
5
4
3
PRESET
2
1
ON/STAND-BY
ON/STAND-BY
DISPLAY MENU
(TV OUT)
DISPLAY CD
TUNER(BAND)
TAPE
AUDIO IN
USB
X-BASS
BASS/TREBLE
VOL
PLAY MODE
PRESET
ENTER
VOL
PRESET
MEMORY
DIMMER CLEAR SLEEP
Remote
Operation
control
Press to turn the
ON/STAND-BY
power on or to
go to stand-by
mode.
Press to enter to
DEMO
demonstration on
or off mode.
Bass control (X-BASS)
When the power is fi rst turned on, the unit will enter the
extra bass mode which emphasizes the bass frequencies,
and "X-BASS" will appear. To cancel the extra bass mode,
VOL.
press the X-BASS button.
Bass control
1
Press the BASS/TREBLE button to select "BASS".
2
Within 5 seconds, press the VOLUME (+ or -) button
to adjust the bass.
Treble control
1
Press the BASS/TREBLE button to select "TREBLE".
2
Within 5 seconds, press the VOLUME (+ or -) button to
adjust the treble.
Auto power on function
When you press any of the following buttons, the unit turns
on.
iPod ® /iPhone, CD, USB, AUDIO IN, TUNER (BAND),
TAPE button (main unit/remote control): Selected
function is activated.
button (main unit): The unit turns on and playback
of the last function will start (iPod/iPhone, CD, USB,
AUDIO IN, TUNER (BAND), TAPE).
iPod/iPhone
on and the iPod/ iPhone playback starts (regardless of
the last function).
CD button (remote control): The unit turns on
and the CD playback starts (regardless of the last
function).
TAPE button (remote control): The unit turns on
and the TAPE playback starts (regardless of the last
function).
USB button (remote control): The unit turns on
and the USB playback starts (regardless of the last
function).
Auto power off function
The main unit will enter the stand-by mode (when iPod/
iPhone is not docked) after 15 minutes of inactivity during:
iPod/iPhone: No connection.
AUDIO IN: No detection of input signal or very low sound
audibility.
TUNER: No reception of broadcast signal.
CD / USB / TAPE: In the stop mode.
Note:
However, if iPod/iPhone is docked, the unit will begin
charging.
"CHARGING" will be displayed.
E-5
button (remote control): The unit turns