Jøtul F 232 Installation And Operating Instructions Manual page 17

Replacing the combustion chamber lining
First remove the baffles (see page 15).
1. Lift the side plates (F), release them from the rear plates
(G) and take them out. Please be aware that the sides (F)
support the rear plates (G) and that these may therefore tip
over, when the sides are taken out.
2. Take out the rear plates (G) and the heat shield (H).
When refitting, follow the same procedure in reverse order.
E
G
F
Replacing the inner bottom and fire grate
First remove the combustion chamber lining (see above).
1. Remove the fire grate (I).
2. Lift the front of the inner bottom (J) and twist it out of the
Service/udskiftning dele, model 234
Jøtul F 230
Stove: Name:
burn chamber.
Material:
Weight: N/A
Articlenumber:
When refitting, follow the same procedure in reverse order.
C:\Working Folder\Designs\Jøtul F230\90230902.idw
Path:
J
Jøtul F 230 Service/udskiftning dele, model 235
Stove: Name:
Material:
Articlenumber: Weight: N/A
C:\Working Folder\Designs\Jøtul F230\90230901.idw
Path:
D
B
Jøtul F 230
NAVN:
MATERIALE:
M3 NR.: DIM.:
C:\Working Folder\Designs\Jøtul F230\90230147.idw
STI:
Drawing
16-10-2017
Date:
number:
sr
Constructed/Changed by:
N/A SCAN A/S
Area:
DK-5492 Vissenbjerg©
I
16-10-2017
Date:
Constructed/Changed by:
Area: N/A SCAN A/S
DK-5492 Vissenbjerg©
Jøtul F 230
NAVN:
MATERIALE:
M3 NR.: DIM.:
C:\Working Folder\Designs\Jøtul F230\90230149.idw
STI:
7.2 Replacing the door glass and
gaskets
A
H
E
Udskiftning af frontglas
EMNE:
19,49 kg
VÆGT:
1074904 mm^2
AREAL:
1. In order to replace the glass, first loosen the lower 2
screws (A), that attach the brackets and discs (B) to the
F
door. Then unscrew the upper 2 screws (A).
Be very careful and support the glass, when you remove
the screws and brackets!
C
90230902
Drawing
90230901
number:
sr
2. Gently remove the glass (C). Remove the damaged gasket
(D). Clean the gasket groove, and press the new gasket
into place.
3. Once all damaged gaskets have been replaced, refit the
Jøtul F 230
NAVN:
Udskiftning af frontglas
EMNE:
door glass and the brackets.
MATERIALE:
19,49 kg
VÆGT:
M3 NR.:
4. For replacement of the large gasket (E), first clean the
1074904 mm^2
AREAL:
C:\Working Folder\Designs\Jøtul F230\90230151.idw
STI:
gasket groove and then glue on the gasket.
A
A
90230147
TG.NR:
jm
DATO: 18-08-17 SIGN:
Scan A/S
DK-5492 Vissenbjerg©
Jøtul F 230
NAVN:
MATERIALE:
M3 NR.:
C:\Working Folder\Designs\Jøtul F230\90230147.idw
STI:
Jøtul F 230
NAVN: EMNE:
MATERIALE:
M3 NR.: DIM.:
C:\Working Folder\Designs\Jøtul F230\90230148.idw
STI:
Udskiftning af frontglas
EMNE:
TG.NR: 90230149
VÆGT:
jm
21-08-17
DATO: SIGN:
1074904 mm^2
DIM.: AREAL:
Scan A/S
DK-5492 Vissenbjerg©
A
A
B
Udskiftning af frontglas
EMNE:
A
DIM.: AREAL:
Udskiftning af frontglas
D
N/A
VÆGT: DATO:
N/A
AREAL:
E
90230151
TG.NR:
19,49 kg jm
DATO: 21-08-17 SIGN:
Scan A/S
DK-5492 Vissenbjerg©
17
19,49
VÆGT:
1074904 mm^2
90
TG.NR:
18-10-17
SIGN
Scan A/S
DK-5492 Vissenbjerg©