Sharp XV-Z20000 Operation Manual page 14

4.
Turn the video equipment on and start playback
5.
Select the input mode
Press the VIDEO button on the remote control to select "VIDEO" for the Input mode.
• Press
/ / /
6.
Adjust the projector angle, focus and zoom
1. The focus is adjusted by
rotating the focus ring.
Focus ring
7.
Turn the power off
Press STANDBY on the remote control, then press that button again while the confi rmation message
is displayed, to put the projector into standby mode.
• Unplug the power cord from the AC outlet after the cooling fan stops.
Playback
VIDEO
/ / / on the remote control to switch the Input mode.
2. Zooming is adjusted by
moving the zoom knob.
STANDBY
3. The projector angle is
adjusted by using the
adjustment feet. As for
adjustment of the vertical
position of the projected
image, use the lens shift dial.
Zoom knob
On-screen display
Page 27
Pages 27, 28
Lens shift dial
Foot releases
Page 26
-13