Setting up the Screen
For optimal image quality, position the projector perpendicular to the screen with the projector's feet flat
and level. Doing so will eliminate the need for Keystone correction and provide the best image quality.
Note
• The projector lens should be centered in the middle of the screen. If the horizontal line passing through the
lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
• For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly
on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.
Standard Setup (Front Projection)
■ Place the projector at the required distance from
the screen according to the desired picture size.
Example of standard setup
Side View
Screen
H1
Center of screen
H2
Top View
Screen
W
Center of screen
-2
Lens center
Lens center
L
Lens center
Lens center
The distance from the screen
•
Lower lens shift
to the projector may vary
position
(High mount setup)
depending on the size of the
screen.
The default setting can be used,
•
when placing the projector in front
of the screen. If the projected im-
age is reversed, readjust the set-
ting to "Front" in the "PRJ Mode"
Upper lens shift
menu. (See page 62 of the
position
(Desktop setup)
projector's operation manual.)
Place the projector so that an
•
imaginary horizontal line that
passes through the center of the
lens is perpendicular to the
screen.
Leftmost lens shift
position
Rightmost lens shift
position